تصميم وتنفيذ دارة تحكم بحركة لوح كهروضوئي باستخدام المايكرو كونترولرPIC

Authors

  • غسان حايك
  • صفوان نضوه

Abstract

يعرض هذا البحث كيفية تصميم وتنفيذ دارة للتحكم بحركة لوح كهروضوئي للحصول على أعظم مردود ممكن، وذلك عن طريق تصميم نظام مكون من دمج عدة طرق من التحكم مع بعضها البعض، ويتم التصميم من خلال تشكيل نظام موحد ندمج فيه التحكم بواسطة حساسات الضوء من جهة والتحكم عن طريق قاعدة بيانات من جهة أخرى بالإضافة الى مقارنة زاوية اللوح الكهروضوئي في كلا الطريقتين. تم تصميم الدارة المقترحة وإجراء المحاكاة لها وتنفيذها بنموذج مصغر يحاكي الواقع، ومناقشة النتائج وذلك لتبيان الفائدة والهدف من النظام المقترح استخدامه وذلك بواسطة المتحكم الصغري Programmable Interface Controller(PIC). This paper shows how to design and implement control circuit in the movement of pv board to reach to maximal possible output, by designing a system to integrate several methods of of control with each other. During this work, we will design through formation a unified system combine control by light sensors, and control via data base on the other hand. In addition to compare pv angle in both ways. The proposed circuit designed, conduct a simulation, and implementation a miniature model simulates reality, and discussed the result to to conflict the advantage and the goal of using the proposed system. All that by using micro controller (PIC).

Downloads

Published

2016-11-22

How to Cite

1.
حايك غ, نضوه ص. تصميم وتنفيذ دارة تحكم بحركة لوح كهروضوئي باستخدام المايكرو كونترولرPIC. Tuj-eng [Internet]. 2016Nov.22 [cited 2024Apr.23];37(4). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/2200

Issue

Vol. 37 No. 4 (2015): العلوم الهندسية

Section

Articles

License

Copyright (c) 2016 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)