إمكانية استخدام مواد كيميائية جديدة كطبقات تبطين للتقليل من الاحتكاك والإهتراء والتآكل

Authors

  • نقولا حموي
  • شفيق أستور

Abstract

تم قياس وتحديد سلوك التآكل والاحتكاك لطبقة تبطين مركّبة من مادتي الكربون والفلور بنسب تركيب معيّنة لكلٍ منها .

تم رش طبقة التبطين هذه حرارياً على قرص مصنوع من حديد الصب ( فونت ) .

تم إجراء الانزلاق بين مسامير أسطوانية مصنوعة من مواد تبطين مكابح عضوية والأقراص المطلية ( المغلّفة ) وغير المطلية .

تم تحديد خواص مواد التبطين بعد قياس قيم القساوة والمسامية ومقاومة التآكل فيها .

تم اختبار خواص مقاومة التآكل في طبقة التبطين اعتماداً على عملية تعريضها لمادة Nacl  بنسبة صغيرة لمدة تزيد عن مائة وخمسين ساعة.

تميزّت طبقة التبطين بأفضل مقاومة تآكل ، تم إجراء اختبارات قياس قيم التآكل والاحتكاك عند قيم ضغط تماس متفاوتة مابين (1.5MPa ÷ 7MPa) وبسرعة انزلاق 1m/sec و3m/sec .

This study deals with the friction and wear behavior of coating layers (fluoride and Graphite).The coatings are thermally sprayed on cast iron disks. Sliding is performed between cylindrical pins manufactured from organic brake linings and the coated and uncoated disks. The coatings are characterized by measuring their hardness, porosity, and corrosion resistance. The corrosion resistance of the coating is tested by exposure to Nacl for 150 hours; the coating layer has had the best corrosion resistance. The friction and wear tests are conducted under contact pressures of  (1.5 MPa to 7 MPa) and sliding speeds of 1 and 3 m/sec.

Downloads

Published

2014-03-25

How to Cite

1.
حموي ن, أستور ش. إمكانية استخدام مواد كيميائية جديدة كطبقات تبطين للتقليل من الاحتكاك والإهتراء والتآكل. Tuj-eng [Internet]. 2014Mar.25 [cited 2024Apr.19];36(2). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/852

Issue

Vol. 36 No. 2 (2014): العلوم الهندسية

Section

Articles

License

Copyright (c) 2014 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.