Control In Power Flow On Transmission High Voltage Transmission 230KV Angle And Inductive Reactance Of Transmission Lines

Authors

  • Faisal Shaaban Tishreen University
  • Nesmet Abu Tabak Tishreen University
  • Ahmad Ali Tishreen University

Keywords:

electric grid, electric power transmission lines, transmission lines impedance, electric transmission angle, electric power, power flow, percentile drop, electric power transmission lines.

Abstract

Improving the passive capacity of the electric power transmission lines is one of the main challenges for electric grid operators, in order to meet the growing demand for electrical energy. Especially when these networks reach their critical thermal limits as a result of the growth of loads or the occurrence of permanent malfunctions, and their inability to meet the growing growth of electrical loads, and for this purpose researchers resort to searching for technical solutions that enable them to transfer a greater amount of electrical capacity across the network itself.

In this research, we will study the flow of electrical power in the 230Kv high voltage transmission network from Baniyas to Lattakia, after the exit of the Zayzoun power station, and its relationship to the transmission line impedance changes on the one hand, and the power transmission angle on the other hand, and search for solutions to improve its value, and determine the best values ​​for each Of inductive reactance and power transmission angle of the network. Taking into consideration the national resistance of the transmission line, while not neglecting it at all stages of the research.

The results that we obtained showed that the exit of the Zayzoun thermal station resulted in an increase in the loading of the transmission lines of the network by varying proportions 48%, and that the appropriate value of the network transmission angle is 22.50 leading to an improvement of the power factor of the transmitting terminal from 0.8 to 0.93, and an increase in the efficiency of the transmission line From (81-90)% and the high pass-through capacity of transmission lines to 995[MW], while the improvement of the inductive reactance led to an improvement in the deviation of percentile tension to 2.25%, a decrease in the distinctive impedance from (430-230) ohms and an increase in the pass-through capacity of the transmission lines to 1000 [MW].

Author Biographies

Faisal Shaaban, Tishreen University

Professor, Electrical Power Department, Faculty Mechanical & Electrical Engineering

Nesmet Abu Tabak, Tishreen University

Assistant Professor, Electrical Power Department, Faculty Mechanical & Electrical Engineering, Tishreen University, Lattakia, Syria.

Ahmad Ali, Tishreen University

PhD student, Electrical Power Department, Faculty Mechanical & Electrical Engineering

Downloads

Published

2020-12-02

How to Cite

1.
شعبان ف, أبو طبق ن, علي ا. Control In Power Flow On Transmission High Voltage Transmission 230KV Angle And Inductive Reactance Of Transmission Lines. Tuj-eng [Internet]. 2020Dec.2 [cited 2024Apr.19];42(5). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/10117

Issue

Vol. 42 No. 5 (2020): Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2020 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)

1 2 > >>