Researching the Possibility of Recycling and Reusing the Asphalt Scraper in the Layers of Asphalt Covering
Keywords:
: asphalt scrap, Marshall method, hot asphalt mixtures, road material recyclingAbstract
Research goal is to study the possibility of recycling the Reclaimed Asphalt , and reusing it in the Bituminous cover layers, Spotlight on rapid reuse or recycling technology Focusing on hot reuse as it is most suitable for the road network in Syria and Explanation of the method of asphalt institute in the design of Reclaimed Asphalt mixtures in detail.
The experimental program (practical section) for this research includes the manufacture of traditional bituminous mixtures and mixtures containing Reclaimed Asphalt , Preparing samples of conventional bituminous mixtures and mixtures containing Reclaimed Asphalt in different weight proportions for Reclaimed Asphalt (10-20-30%)from total mixture, depending on the Marshall method for designing bituminous mixtures.
Through experiments on mixtures, it was found that the stability values increased in mixtures containing Reclaimed Asphalt than in conventional mixtures, in mixtures containing Reclaimed Asphalt by 10% and the stability value was (2499.09 Kg).
While a significant decrease in the flow value was observed in mixtures containing Reclaimed Asphalt than in conventional mixtures at the ideal bitumen ratio, the lowest stability value was recorded at (30%) of the Reclaimed Asphalt to reach (3 mm).
Downloads
Published
Issue
Section
License
Copyright (c) 2021 https://creativecommons.org/licenses/by-nc-sa/4.0/
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series
Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series . The Readers have the right to send, print and subscribe to the initial version of the article, and the title of Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series Publisher
journal uses a CC BY-NC-SA license which mean
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
- The licensor cannot revoke these freedoms as long as you follow the license terms.
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
