Comparison of the amount of marginal fit and shear strength tolerance between the prefabricated abutments and the abutments manufactured using the CAD/CAM method of zirconia and the abutments manufactured by the waxing method of the chroum-cobalt mixture

Authors

  • Feras Suleiman Tishreen University
  • Nasir Bahrli Tishreen University
  • Ali Khalil Tishreen University

Abstract

Aim of the study: this study aimed to compare the marginal fit accuracy and fatigue resistance between stock abutments, milled zirconia abutments, and lost wax chrome-cobalt abutments.

Materials and methods: An in vitro study was conducted on 30 abutments, divided according to manufacturer method into three equal groups (ten stock abutments, ten milled zirconia abutments, and ten lost wax chrome-cobalt abutments). The marginal fit accuracy and the fatigue resistance tests were done for three groups, and the values were registered. One way Anova was used to compare the means between the three studied groups and Tukey tests were used as a post-hoc test.

Results: A statistically significant difference was found when comparing the marginal fit accuracy between the three groups (p<0.001), in addition to significant differences between every two groups (p<0.001). The stock abutments had the best marginal fit accuracy, and the waxed abutments were the least. The fatigue resistance comparison showed that there was a significant difference between the three groups (p<0.001), in addition to significant differences between every two groups (p<0.001). The fractures have occurred at a force of 662.8 N for chrome-cobalt abutments, 142.7 N for zirconia abutments, and 499.9 for stock abutments.

Conclusions: stock abutments showed the best marginal fit accuracy comparing and the waxed abutments was the least. Whereas, waxed chrome-cobalt abutments were the most resistance to fractures and milled zirconia abutments were the least.

Downloads

Published

2023-03-22

How to Cite

1.
سليمان ف, ناصر بهرلي, علي خليل. Comparison of the amount of marginal fit and shear strength tolerance between the prefabricated abutments and the abutments manufactured using the CAD/CAM method of zirconia and the abutments manufactured by the waxing method of the chroum-cobalt mixture . Tuj-hlth [Internet]. 2023Mar.22 [cited 2024Apr.28];45(1):93-103. Available from: https://journal.tishreen.edu.sy/index.php/hlthscnc/article/view/14192

Issue

Vol. 45 No. 1 (2023): Tishreen University Journal for Research and Scientific Studies - Health Sciences Series

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Health Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Health Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Health Sciences Series  Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.