Comparison of the Intrusion Forces Generated by Intrusion Utility Arches According to Alloy Type, Wire Section and Activation Amount - An Invitro Study

Authors

  • Saeed Kalash University Aleppo
  • Jamal Dabbas University Aleppo

Abstract

The aim of study: Evaluation of the intrusion forces resulting from Ricketts' IUA Intrusion Utility Arches at different activation degrees using different alloys and wire sections - to know the importance of the type of alloy and wire section used to manufacture Intrusion Utility Arches.

Materials and Methods: We used straight wires (recommended by the manufacturers of this arch) of stainless steel and Elgiloy alloys with two different section of 0.016 x 0.016 inch and 0.016 x 0.022 inch to make the Intrusion Utility Arches. Each sample consisted of 10 arches. An acrylic upper jaw model was used to perform the experiment. The arches were activated by 5-10-15-20 mm. Measured from the level of the anterior segment of the intrusion utility arch to the imaginary line representing the braces incision in the midline region, the amount of force produced was recorded at activation levels of 5-10-15-20 mm.

Results The forces recorded at activation levels of 5-10-15-20 mm were all significant among the studied arches, and the current study confirmed that there was no difference between the stainless steel and blue elgiloy alloys, and the importance of choosing the intrusion utility arches section, as two different values of force were recorded when using either of the two sections at all levels of activation.

Downloads

Published

2023-09-17

How to Cite

1.
كلش س, جمال دباس. Comparison of the Intrusion Forces Generated by Intrusion Utility Arches According to Alloy Type, Wire Section and Activation Amount - An Invitro Study. Tuj-hlth [Internet]. 2023Sep.17 [cited 2024Nov.24];45(4):347-61. Available from: https://journal.tishreen.edu.sy/index.php/hlthscnc/article/view/15457

Issue

Vol. 45 No. 4 (2023): Tishreen University Journal for Research and Scientific Studies - Health Sciences Series

Section

Master student researches

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Health Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Health Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Health Sciences Series  Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.