An in vitro comparative study to evaluate frictional resistance in sliding mechanics using different types of brackets and arch wires

Authors

  • Ahmad Hammode Tishreen university
  • Fadi Khalil Tishreen University

Abstract

Aim: The aim of this study is to evaluate the impact of different types of bracket materials and wires on static friction values, to reach the best bracket/wire combination that achieves desired static friction values  .

Materials and Methods : Zweigle F 427 device was used to test the values of static friction of the different study groups. The study used (20) upper right canine MBT brackets with (0.022× 0.028 inch) slot size, distributed as follows ; (10) Mono crystalline Alumina bracket (MCA), and (10) metal brackets made of stainless steel (SS) , and (20) straight wire made of stainless steel with 0.017×0.025 inch dimension, (10) of which are traditional and (10) of which are coated with Teflon. 

The study was divided into four groups, each included five pairs;

The first group; (5) stainless steel brackets – (5) stainless steel wire .

The second ;(5) stainless steel brackets – (5) stainless steel wire coated with Teflon .

The third; (5) MCA  brackets – (5) stainless steel wire.

The fourth; (5) MCA  brackets – (5) stainless steel wire coated with Teflon .

The study used a standardized ligation method for all groups, using 0.009 inch pre-formed steel ligation wire. The brackets were adhered to pre-formed metal rings using Cyano Acrylate Glue Adhesive (Alteco). Each couple   was tested only once in order to eliminate any effect of wear.

Results: Significant difference was observed between groups in the static friction values at a 95% confidence norm and P-value ˂ 0.05 . The samples of the second group had the lowest static friction values , followed by the first group , then the fourth group, and finally the third group.

Conclusions: It is recommended to use (ss bracket/Teflon coated ss archwire) combination when low static friction values are needed, and (MCA bracket/ ss archwire) combination when high static friction values are needed  . 

Downloads

Published

2024-01-31

How to Cite

1.
حمودي أ, فادي خليل. An in vitro comparative study to evaluate frictional resistance in sliding mechanics using different types of brackets and arch wires. Tuj-hlth [Internet]. 2024Jan.31 [cited 2024Nov.24];45(6):191-204. Available from: https://journal.tishreen.edu.sy/index.php/hlthscnc/article/view/16197

Issue

Vol. 45 No. 6 (2023): Tishreen University Journal for Research and Scientific Studies - Health Sciences Series

Section

Master student researches

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Health Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Health Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Health Sciences Series  Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.