Exergy analysis study a Jander combined (gas-steam) power plant

Authors

  • wasem mazloum tishreen university
  • Mohamad Ali Tishreen University

Keywords:

combined cycle power plant ,gas-steam ,exergy analysis at variable loads ,exergy efficiency ,heat recovery steam generator

Abstract

In this research an analysis of exergy was carried out in a combined (gas-steam) Gander thermal power plant to generate electrical energy at several variable loads ,modeling was done on the EES program (Engineering Equation Solver) ,where the actual data of the power plant's work was entered ,and the rest of the parameters were calculated based on EES ,and the mathematical equations necessary for the exergy analysis of the parts of the thermal cycle were programmed by adopting on exergy  equilibrium equations  in each component of the power plant , Determining the  exergy losses and exergy efficiency in each component ,the exergy was analyzed at variable loads (75%,100%) for each of the air compressor ,combustion chamber ,gas turbine ,(HRSG) heat recovery steam generator ,steam turbine and air cooled condenser.

The effect of several investment factors on the oxygen efficiencies at the station was also studied: ambient temperature ,condenser pressure.

Downloads

Published

2024-01-31

How to Cite

1.
مظلوم و, محمد علي. Exergy analysis study a Jander combined (gas-steam) power plant. Tuj-eng [Internet]. 2024Jan.31 [cited 2024Dec.20];45(6):269-84. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/14342

Issue

Vol. 45 No. 6 (2023): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Master student researches

License

Copyright (c) 1970 wttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.