بيولوجيا بسيلا أوكاليبتوس الصمغ الأحمر ذات القلنسوة Glycaspis brimblecombei Moore, 1964 (Hemiptera: Aphalaridae) في محافظة اللاذقية، سورية.
Abstract
تم في هذا البحث التسجيل الأول لحشرة بسيلا أوكاليبتوس الصمغ الأحمر ذات القلنسوة Glycaspis brimblecombei Moore, 1964 (Hemiptera: Psylloidea: Aphalaridae) على أوراق أشجار الاوكاليبتوس الأحمر Eucalyptus camaldulensis (Myrtaceae) في سورية. تم جمع الحشرة من الأوراق والنموات الحديثة والقديمة لأشجار الاوكاليبتوس من ثلاث مواقع في محافظة اللاذقية خلال شهر حزيران/ يونيو من عام 2015. تم توضيح صفات المظهر الخارجي للحشرات وقورنت بالمفاتيح التصنيفية المتخصصة. أظهرت النتائج أن أعلى متوسط لمجموعات بيوض البسيلا كان في موقع بستان الباشا على السطح السفلي للأوراق وبلغ 5.80±2.00 مجموعة، وكان أعلى متوسط لأعداد البيوض في الموقع ذاته على السطح السفلي للأوراق أيضاً وبلغ 65.80±47.97 بيضة/ورقة. كان أعلى متوسط لأعداد الحوريات تحت القلنسوة البيضاء في موقع بستان الباشا على السطح السفلي للأوراق حسب أعمارها كما يلي: L1: 18.4±9.51، وL2: 9.60±3.32، وL3: 6.40±0.92، بينما L4: 2.80±1.74 على السطحين العلوي والسفلي. كان أعلى متوسط لأعداد حوريات البسيلا بدون قلنسوة بيضاء للحورية الأولى L1: في موقع شهد العسل على السطح السفلي 3.40±0.87، وL2: في الموقع ذاته على السطح العلوي 5.80±2.43، وL3: في موقع بستان الباشا على السطح السفلي 2.80±0.58، وL4: في موقعي شهد العسل وبستان الباشا 0.20±00.2 على السطح العلوي والسفلي. كان أعلى متوسط لأعداد الحشرات الكاملة في موقع بستان الباشا على السطح العلوي 1.40±1.16، وأقلها في موقع شهد العسل على السطح العلوي 0.20±0.20. In this research, the occurrence of Glycaspis brimblecombei Moore (Hemiptera: Psylloidea: Aphalaridae) was recorded for the first time on Eucalyptus camaldulensis (Myrtaceae) leaves in Syria. Where collected from the leaves and shoots of young and old trees of eucalyptus from Lattakia province in June 2015 in three sites. The morphological characters examined and compared with the specialized keys for this species. The results showed that the highest average for psyllid egg masses was in Bustan AlBasha on the lower surface of the leaves and amounted to 5.80±2.00 mass, had the highest average number of eggs in the same location and on the lower surface also reached 65.80±47.97 eggs / Leaf. The highest average number of nymphs under the Lerp in Bustan AlBasha on the lower surface of the leaves as stage as follows: L1: 18.4±9.51, and L2: 9.60±3.32, and L3: 6.40±0.92, while L4: 2.80±1.74 on the upper and lower surfaces. The highest average number of psyllid nymphs without white Lerp was for the first nymph L1: In Shahd Alaasal site on the Lower surface 3.40±0.87, and L2: at the same previous location on the upper surface of 5.80±2.43, and L3: in Bustan AlBasha site on the Lower surface 2.80±0.58, and L4: in Shahd Alaasal and Bustan AlBasha 0.20±0.20 on the upper and lower surface. The highest average number of adult in the site Bustan AlBasha on the upper surface of 1.40±1.16, and the lowest in the site Shahd Alaasal on the upper surface of 0.20±0.20.Downloads
Published
How to Cite
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to the Tishreen University Journal for Research and Scientific Studies - Biological Sciences Series
Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in Tishreen University Journal for Research and Scientific Studies - Biological Sciences Series . The Readers have the right to send, print and subscribe to the initial version of the article, and the title of Tishreen University Journal for Research and Scientific Studies - Biological Sciences Series Publisher
journal uses a CC BY-NC-SA license which mean
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
- The licensor cannot revoke these freedoms as long as you follow the license terms.
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.