Study the Behavior of Steel Connections Used in Metal Structures with the Help of the Finite Element Method and the Use of the CATIA V5 Program

Authors

  • Ali Hatra Tishreen University

Keywords:

Analysis and Simulation, Finite Element Method, CAD, Metal Structure,

Abstract

This research presents the study of the conductivity of joints used in metal constructions with the help of the finite element method and the use of the CATIA V5 program. The studied model is a steel joints with a plate at its ends connected by screws. We will study the effect of changing the radius the screw of jonction, the thickness of the end plates, and the length of the supporting column. Failure patterns and the results of change in stiffness and rotation were shown, and Von Mises stresses were analyzed on the permissible plates and screws.

Author Biography

Ali Hatra, Tishreen University

Associate Professor - Design and Production Engineering Dep. -Mechanical & Electrical College

Published

2021-01-18

How to Cite

1.
هترة ع. Study the Behavior of Steel Connections Used in Metal Structures with the Help of the Finite Element Method and the Use of the CATIA V5 Program. Tuj-eng [Internet]. 2021Jan.18 [cited 2024Mar.2];42(6). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/10215