Modeling and Simulation of Vibrations in Turning Using Matlab to Analyse Stability of the Cutting Process

Authors

  • Mohamad Kheir Mohamad Tishreen University
  • Amani Nasser Tishreen University

Keywords:

Modeling and Simulation, linear model, turning, vibration, stability.

Abstract

The study has been carried out during the year 2020 in Tishreen University. Modeling and simulation has been done for dynamic state of tool - workpiece system  in turning, based on the mathematical model of system, where the mathematical model used is a linear model.

In the beginning, the differential equations that describe the vibration between the workpiece and the cutting tool have been mathematically concluded, then modeling and simulation operations for specific parameters have been applied for the mathematical model using Matlab, so we can make sure if the system is stable or unstable, which affect directly on the quality of workpiece.

Author Biographies

Mohamad Kheir Mohamad, Tishreen University

Assistant Professor, Department of Design and Production, Faculty of Mechanical and Electrical Engineering,

Amani Nasser, Tishreen University

Postgraduate Student (Master) , Department of Design and Production , Faculty of Mechanical and Electrical Engineering,

Downloads

Published

2021-05-01

How to Cite

1.
محمد مخ, ناصر ا. Modeling and Simulation of Vibrations in Turning Using Matlab to Analyse Stability of the Cutting Process. Tuj-eng [Internet]. 2021May1 [cited 2025Jan.28];43(2). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/10534

Issue

Vol. 43 No. 2 (2021): Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2021 Ùttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.