Design and Analysis of a Wide-Band Printed Fractional Antenna for Medical and Internet Equipment Applications

Authors

  • El-Samau'al Saleh Tishreen University
  • Sadiq Ali Tishreen University
  • Amjad Saeedi Tishreen University

Keywords:

Printed Antenna, Broadband Antenna, Fractional Engineering, HFSS Simulator, Internet Equipment, Medical Equipment

Abstract

Printed antennas are considered to be one type of the most common antennas in the field of wireless communication, as they are widely used in internet equipment and wireless medical equipment, due to their simple structure, low cost and good gain.

Internet equipment and wireless medical equipment are characterized by their high sensitivity in transmitting data, and in  the accuracy of manufacturing their printed circuits, therefore the antenna used in such equipment is considered an essential component, and must be characterized by the best parameters in terms of gain, directivity, radiation energy and quality.

This paper presents a design for a wide-band printed fractional antenna operating in several frequency fields, suitable for internet and wireless medical applications within
the range of (1-10) GHZ, by using fractional engineering, that provides a multi-dimensional structure, in order to generate different resonant frequencies according to the effective lengths in this structure.

The aforementioned antenna was designed and analyzed using HFSS (High Frequency Structure simulation), which is considered as a virtual lab, that allows to perform a large number of tests, which saves time and cost,  until reaching  the appropriate design for the required application. This simulator allows the analysis of all the antenna parameters such as frequency, gain, bandwidth, radiation pattern and reaching frequency response.

Author Biographies

El-Samau'al Saleh, Tishreen University

Professor - Department of Communication Engineering - College of Mechanical and Electrical Engineering

Sadiq Ali, Tishreen University

Associate Professor - Department of Communication Engineering - College of Mechanical and Electrical Engineering

Amjad Saeedi, Tishreen University

Postgraduate Student (PhD) - Department of Communication Engineering - College of Mechanical and Electrical Engineering

Published

2021-05-09

How to Cite

1.
صالح ا, علي ص, سعيدي ا. Design and Analysis of a Wide-Band Printed Fractional Antenna for Medical and Internet Equipment Applications. Tuj-eng [Internet]. 2021May9 [cited 2024Apr.17];43(2). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/10550

Most read articles by the same author(s)

<< < 1 2 3