Study of the Effect of Heat Treatments on the Ability of Flat Springs to Resist Permanent Deformation

Authors

  • Suleiman Ali Tishreen University
  • Ali Hatra Tishreen University
  • Ali Saeed Tishreen University

Keywords:

Springs, Heat Treatment, SUP3, Flat Springs.

Abstract

 

The effect of heat treatment on the resistance of SUP3 flat springs to permanent deformation was studied. The heat treatments produced different microstructures that gave the steel different mechanical properties, and to evaluate the properties we conducted different tests on the specimen followed by preparing a mathematical model for a flat spring that was loaded with a small load. It was found that the Isothermal treatment resulted in an increase of yield strength and this led to an increase in the material’s resistance to permanent deformation compared to other specimens.

Author Biographies

Suleiman Ali, Tishreen University

Associate Prof., Dep. Design and Production Engineering,

Ali Hatra, Tishreen University

Associate Prof., Dep. Design and Production Engineering,

Ali Saeed, Tishreen University

Postgraduate Student( Master), Dep. Design and Production Engineering

Downloads

Published

2021-05-17

How to Cite

1.
علي س, هترة ع, سعيد ع. Study of the Effect of Heat Treatments on the Ability of Flat Springs to Resist Permanent Deformation. Tuj-eng [Internet]. 2021May17 [cited 2024Nov.24];43(2). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/10573

Issue

Vol. 43 No. 2 (2021): Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2021 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)

1 2 3 > >>