Comparison of Heat Transfer in the Case of Turbulent Flow Between a Duct Without Ribs and a Duct with Semi-Circular Inner Ribs

Authors

  • Yamen Kbely Tishreen University

Keywords:

Heat transfer, Turbulent Flow, Duct, Inner Ribs.

Abstract

In this research, an experimental model was created to study the effect of adding a semi-circular internal rib inside a square-shaped duct on the heat transfer in case of turbulent flow, and a comparison was made between the air temperature inside the duct before and after adding the ribs.

Conditions studied: Reynolds numbers (10460- 40500), air temperature Inlet 25 ℃, the flow is manually changed by the flow control valve.

Through experiments, it was found that there was an improvement in the heat transfer of the duct equipped with circular ribs compared to the duct without a rib at a rate ranging between (10.87-28.13) %.

 

Author Biography

Yamen Kbely, Tishreen University

Master, Department of Power Mechanical, Faculty of  Mechanical and Electrical Engineering

Downloads

Published

2021-07-07

How to Cite

1.
قبيلي ي. Comparison of Heat Transfer in the Case of Turbulent Flow Between a Duct Without Ribs and a Duct with Semi-Circular Inner Ribs. Tuj-eng [Internet]. 2021Jul.7 [cited 2024May2];43(3). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/10623

Issue

Vol. 43 No. 3 (2021): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2021 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.