Development of a hybrid circuit for a system (solar – wind-hydraulic)

Authors

  • Mostafa Almarmour Tishreen University
  • Salah Dawoud Tishreen University
  • Mohamad Kheir Mohamad Tishreen University

Keywords:

المنظومتين الريحية

Abstract

Solar and wind energy are clean energy sources with great potential to reduce dependence on the grid. The research aims to study a circuit consisting of three systems (wind turbine - electric solar cells - hydraulic) to supply electrical loads to homes and operate pumps. Where the average wind speed is 4 m/s at a height of 30 m.

The average daily solar radiation intensity for the months of the year was studied at several values ​​of the angle of inclination of the solar panel. It was found that the optimal angle of inclination of the solar panel is the angle corresponding to the latitude angle of the studied area, and the capacity and number of solar cells were studied.

The hydraulic losses inside the pipes were studied in order to know the capacity of the pump needed to be installed to overcome the losses.

The three systems were modeled in the Matlab/simulink environment and linked with an electrical power control controller that extracts energy from the wind and solar systems and distributes it to the consumer, batteries and pump.

 

Downloads

Published

2023-02-27

How to Cite

1.
مصطفى المرمور, صلاح داوود, محمد خير محمد. Development of a hybrid circuit for a system (solar – wind-hydraulic). Tuj-eng [Internet]. 2023Feb.27 [cited 2024May2];44(6):287-303. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/13524

Issue

Vol. 44 No. 6 (2022): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Master student researches

License

Copyright (c) 2023 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.