Improving Wind Turbine Performance by Intelligent Pitch Angle Control

Authors

  • Zeinab Hammoud tishreen university
  • Salah Dawod Tishreen University
  • Fadi Motawej ALManara university

Abstract

This paper presents an effective control strategy for wind turbine that it ensure the continuity of its work and its benefits by producing energy and maintaining the life of the turbine despite the changing wind speed and its turbulence. This paper discusses pitch angle control at high wind speed to reduce the corresponding loads on the turbine and preserve its parts. Yaw angle control at low wind speed to get the maximum power out of the turbine. Artificial intelligence techniques have been used (neural networks and fuzzy logic) to design a controller capable of adapting to changing wind conditions. Neural network and fuzzy logic work effectively when the nature of the system is variable and non-linear. The proposed controller was compared with pid and fuzzy pid controllers, and the results showed that the proposed controller achieved better results in term of response speed and reduce steady-state error.

Downloads

Published

2024-08-12

How to Cite

1.
Zeinab Hammoud, Salah Dawod, Fadi Motawej. Improving Wind Turbine Performance by Intelligent Pitch Angle Control. Tuj-eng [Internet]. 2024Aug.12 [cited 2024Aug.13];46(3):327-42. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/14857

Issue

Vol. 46 No. 3 (2024): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Master student researches

License

Copyright (c) 1970 sttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.