Using the PSO algorithm to study the effect of shear stress on an I-shaped section on von Meses stress.

Authors

  • Ayham dwai Tishreen University
  • Ayman Youssef Tishreen University
  • Hatem Mahmoudi Tishreen University

Abstract

In this research, a section in the form of the letter I of one length, made of steel alloy st 37-2,  loaded of [1] KN, and the Von Mises stress generated in the section under the influence of this load was studied. Then the PSO algorithm was used to obtain the optimal dimensions of the studied section that achieve the lowest possible shear stress under the influence of the same load, the inverter program was used to verify the results and determine the value of the von Mises stress for the resulting section.

Downloads

Published

2024-08-04

How to Cite

1.
دواي ا, ايمن يوسف, حاتم محمودي. Using the PSO algorithm to study the effect of shear stress on an I-shaped section on von Meses stress. Tuj-eng [Internet]. 2024Aug.4 [cited 2024Aug.13];46(3):243-52. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/15813

Issue

Vol. 46 No. 3 (2024): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2024 https://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.