Study the influence of the brake flaps on the ship braking and maneuvering using CFD

Authors

  • Rahaf Deeb Tishreen University
  • Nawar Abbas Tishreen University

Abstract

In this research, brake flaps were added to the hull of the KVLCC2 ship, and their effect on increasing the braking force of the ship was studied to reduce the large distances traveled by large ships during the stopping operation and before reaching the final stopping stage. This study used a Computational Fluid Dynamics (CFD) technique. The RANS equations and k-ω SST model were used to solve the Navier Stocks Equations. The program ANSYS was used in this research.

Initially, the numerical results were compared with the available experimental results. The agreement between both results was that good. After that, the calculations were made with one brake flab in several sites to the symmetrical part of the ship's hull, and then we added two flaps. The resistance and moments affecting the tanker during sailing were calculated at a straight course and different drift angles and speeds. The resistances and moments acting on the ship while sailing were calculated, and the results were studied and analyzed.

Downloads

Published

2024-06-08

How to Cite

1.
ديب ر, نوار عباس. Study the influence of the brake flaps on the ship braking and maneuvering using CFD. Tuj-eng [Internet]. 2024Jun.8 [cited 2024Dec.23];46(2):103-21. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/17024

Issue

Vol. 46 No. 2 (2024): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Master student researches

License

Copyright (c) 2024 https://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.