Studying the effect of changes occurring in a thermo-electrochemical cell using an electrogel and different types of Cathode metal

Authors

  • milad jokhadar Tishreen University

Abstract

In this research, several types of  thermo-electrochemical cell were studied,which utilize copper as the anode and various metals as the cathode (zinc, aluminum, chromium)in the form of thin sheets with dimensions of (50ˣ30ˣ1) mm, and using a gel electrolyte (electrogel) of sodium alginate with different concentrations (4%, 4.8%, 5.4%, 6.4%, 7.2%, 8%).A study was conducted of the effect of thevalue of the temperature difference between the electrodesandthe difference of the electrolyte concentration on the value of the open circuit voltage of the cell and on the value of the Seebeck coefficient of the cell .The results showed that the open circuit voltage increases with increasing the temperature difference between the two electrodes ∆T for all studied cells. So that the highest cell voltage (690 mV) was obtained when using copper-zinc electrodes and a concentration of 8% for the gel electrolyte, with a temperature difference betweenthe two electrodes (∆T= ). The best value of Seebeck’s coefficient ( =6.02 mv/k ) was also obtained with the same copper-zinc electrodes and a concentration (6.4%) of the gel electrolyte at a temperature difference between the electrodes of  (∆T= ).

Downloads

Published

2024-08-04

How to Cite

1.
جوخدار م. Studying the effect of changes occurring in a thermo-electrochemical cell using an electrogel and different types of Cathode metal . Tuj-eng [Internet]. 2024Aug.4 [cited 2024Aug.13];46(3):189-98. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/17567

Issue

Vol. 46 No. 3 (2024): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2024 https://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.