نمذجة عددية بطريقة العناصر المنتهية لتشوهات سطح الأرض الناتجة عن تنفيذ الأنفاق السطحية في الترب الطرية

Authors

  • وائل حرفوش
  • مالك حسن
  • أشرف شبلي

Abstract

تتناول هذه المقالة دراسة هبوط سطح الأرض الناتج عن تنفيذ الأنفاق السطحية باعتماد تحليل عددي ثنائي الأبعاد حسب طريقة FEM، بافتراض شرط الحقل الأخضر, والذي يعني عدم وجود أية حمولات على سطح الأرض فوق النفق.و قد تم نمذجة المسألة باعتماد الحالة التشوهية المستوية باعتماد سلوك مرن –لدن لا خطي لنمذجة السلوك الاجهادي - التشوهي التربة وفق موديل (Hardening Soil Model: HS-Model). تتضمن هذه المقالة مقارنة بين نتائج التحليل العددي و قياسات الحقلية مرجعية لمشاريع منفذة كما تتضمن دراسة بارامترية لأغلب العوامل التي تؤثر على هبوط سطح الأرض. In this paper, ground surface settlement induced by tunneling have been studied using 2D finite element analysis. By assuming greenfield conditions, which means that there is no loads on the soil surface above the tunnel. A FE study was conducted in which an elasto-plastic constitutive model was adopted to model the soil behavior (MC,HS). This paper include Comparison between actual field measurements with (FEM) results, and parametric study for the most factors that influence ground surface settlement.

Downloads

Published

2016-11-23

How to Cite

1.
حرفوش و, حسن م, شبلي أ. نمذجة عددية بطريقة العناصر المنتهية لتشوهات سطح الأرض الناتجة عن تنفيذ الأنفاق السطحية في الترب الطرية. Tuj-eng [Internet]. 2016Nov.23 [cited 2024Nov.23];37(4). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/2214

Issue

Vol. 37 No. 4 (2015): العلوم الهندسية

Section

Articles

License

Copyright (c) 2016 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)

<< < 1 2