دراسة متانة وصلات اللصق وتحسنيها

Authors

  • رامي منصور
  • لطيفة الحموي
  • رانيا حسن

Abstract

يهدف البحث إلى دراسة متانة وصلات اللصق التراكبية البسيطة، لصفائح الألمنيوم المطبقة كثيرا في التطبيقات الهندسية، وتم التحقق من تأثير كل من مسافة التداخل، وقيم الخشونة السطحية للسطوح الملصقة على متانة القص للوصلات المنجزة، حُضّرت الوصلات الملصقة باستخدام نوعين من المواد اللاصقة، وهما الايبوكسي والأكريليك ونُفذت الاختبارات التجريبية تحت تأثير حمل الشد حتى الكسر باستخدام آلة الشد. أظهرت النتائج إمكانية زيادة متانة الوصلات الملصقة بزيادة طول التداخل، وزيادة قيم الخشونة السطحية للسطوح الملصقة وحدد لاصق الأكريليك بأنه اللاصق الأمثل في الاختبارات المنفذة، وذلك تبعا لنمط الفشل الحاصل في العينات المختبرة، والتي لم تتعرض فيها منطقة اللصق للانهيار مع زيادة الحمولة المطبقة. The aim of this study is to determine strength of adhesive single-lap joints of Aluminum alloys which are widely used in geometric applications. It was investigated to define the influence of overlap length and surface roughness value on shear strength of achieved adhesive joints. It was used Epoxy and Acrylic adhesives to prepare adhesive joints and all the specimens were subjected to axial tensile tests and the results are presented as a comparison. Results of those tests showed that shear strength increased with increasing each of overlap length and surface roughness of adherends and Acrelicadhesiveproduced better results according to failure mode of tested samples.

Downloads

Published

2017-10-25

How to Cite

1.
منصور ر, الحموي ل, حسن ر. دراسة متانة وصلات اللصق وتحسنيها. Tuj-eng [Internet]. 2017Oct.25 [cited 2025Apr.22];38(5). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/3261

Issue

Vol. 38 No. 5 (2016): العلوم الهندسية

Section

Articles

License

Copyright (c) 2017 �ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.