التقييم الستاتيكي لقميص طرف صناعي سفلي تحت الركبة من النوع(PTB)

Authors

  • رائد نجار
  • يارا محمد
  • غدير علي

Abstract

تم في هذا البحث تركيب أطراف صناعية لأربعة مصابين بالبتر السفلي تحت الركبة متشابهين في حالة البتر واستخدام القميص من النوع PTB ( وتر الرضفة) و استخدام طريقة القوالب الجبصية في تصنيع القميص من أجل تحديد عيوب هذه الطريقة من خلال دراسة خمس عوامل ( إفلات القميص, دوران القميص, التقرحات الجلدية, حرية الثني, أماكن الضغط الزائد ), حيث يرتبط العاملان الأول والثاني بأنظمة تعليق القميص و العوامل الثلاثة المتبقية ترتبط مباشرةً بنظام استناد قميص الطرف الصناعي, تبين أن نظام التعليق المطبق الناتج عن الضغظ و الإقفال في المنطقة الوحشية العلوية مناسب ولا يوجد فيه أي مشاكل في الافلات و الدوران كما تبين أن توزع الضغط بين القميص والجذمور هو المشكلة الأساسية عند استخدام الطرف ومن أهم ما يترتب عن التوزع غير الملائم للضغط الكثير من التقرحات الجلدية وعدم الراحة عند الإستخدام .

Four sockets had been manufacturing In this research With the lower amputation below the knee, using of the PTB)Patella tendon bearing( socket, and the use of the gypsum form in the socket production to identify the disadvantages of this method by studying five factors (drop socket, socket rotation, skin ulcers, The first and second factors associated with the socket suspension systems and the three remaining factors are directly related to the system of the prosthesis of the industrial side socket. The suspension system resulting from the compression and closure in the upper lateral area is suitable and there are no problems of drop and rotation. Pressure Between the socket and the limb is the main problem when using the prosthetic and the most important consequence of the distribution of inappropriate pressure a lot of skin ulcers and discomfort when used

Downloads

Published

2018-11-07

How to Cite

1.
نجار ر, محمد ي, علي غ. التقييم الستاتيكي لقميص طرف صناعي سفلي تحت الركبة من النوع(PTB). Tuj-eng [Internet]. 2018Nov.7 [cited 2025Jan.28];40(4). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/4536

Issue

Vol. 40 No. 4 (2018): العلوم الهندسية

Section

Articles

License

Copyright (c) 2018 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.