الاختيار الآمن للمكثفات المستخدمة لتحسين عامل الاستطاعة
Abstract
إن وجود المكثفات المستخدمة في تحسين عامل الاستطاعة وذات المفاعلة السعوية إلى جانب المفاعلة التحريضية المكافئة لنظام القدرة الذي يحتوي على توافقيات يزيد من احتمال حدوث حالة رنين تفرعي، مما قد يؤدي إلى تلف وانفجار وتخريب هذه المكثفات. بناء على ذلك فإنه يجب اختيار هذه المكثفات بعناية تامة بحيث يتم تجنب حدوث حالة الرنين ومن ثمة تجنب الأضرار الناتجة عنه.
لذلك سوف أقدم ضمن هذا البحث طريقة عملية وسهلة التطبيق يمكن استخدامها عند اختيارنا لمكثفات تحسين عامل الاستطاعة بحيث يكون هذا الاختيار آمناً من حيث احتمال حدوث حالة الرنين. تعتمد هذه الطريقة على إنشاء مخطط يبين مناطق العمل الآمنة وغير الآمنة لعمل المكثفات المختارة، ويأخذ بالحسبان الشروط الحدية لتحميل المكثفات وبالاعتماد على قيمة دليل الرنين الذي يتحدد من خلال نسبة ممانعات التوافقيات إلى ممانعة التوافقية الأساسية ومن أجل قيمة محددة للتشوه الكلي للجهد يتم الحكم فيما إذا كان اختيار المكثفات آمناً أم لا. ولتوضيح هذه الطريقة أوردت ضمن البحث تطبيقاً على نموذج لنظم قدرة يبين خطوات تنفيذ هذه الطريقة.
The presence of capacitors banks used for power factor correction besides the equivalent inductive reactance of power system which has harmonics increases the probability of the occurrence of parallel resonance causing harm and damage to these capacitors.
Therefore, this paper introduces an easy-to-use method for safe selection of power factor correction capacitors. The method depends on a chart that shows safe and non-safe working region of selected capacitors and takes into account the loading limits of capacitors. Knowing the resonance index, which is determined by the ratio of harmonic impedance to the basic system impedance and for a limited value of total harmonic distortion, we can decide that the selected capacitors are safe or not. To illustrate the method, practical examples were included in this paper.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 �ttps://creativecommons.org/licenses/by-nc-sa/4.0/

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series
Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series . The Readers have the right to send, print and subscribe to the initial version of the article, and the title of Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series Publisher
journal uses a CC BY-NC-SA license which mean
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
- The licensor cannot revoke these freedoms as long as you follow the license terms.
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.