تصميم وتنفيذ آلة اختبار لدراسة تأثير خشونة السطوح على الاحتكاك والاهتراء في عقد الاحتكاك

Authors

  • أحمد سلامة
  • خضر خفيف
  • رانيت سويقات

Abstract

قمنا خلال هذا البحث بتصميم آلة اختبار خاصة تمكننا من إجراء طيف واسع من التجارب على حالات الاحتكاك المختلفة بين السطوح المعدنية منها دراسة تأثير خشونة السطوح على الاحتكاك والاهتراء في عقد الاحتكاك وذلك حسب خشونة السطوح المنتجة. وذلك بالاستفادة من الإمكانية التي تتيحها الآلة بتغيير الشروط والبارامترات التالية ) تغيير السرعة النسبية بين السطوح المحتكة - تغيير خشونة السطوح- تغيير وسط الاحتكاك (رطب أو جاف) - تغيير الحمل)

Throughout this research, we have designed a special test machine so that we can do a wide range of experiments on various cases of friction between metal surfaces in order to study the effect of surface roughness on friction and wear, depending on the roughness of the surfaces produced,  and making use of the possibility offered by the machine to change the following conditions and parameters: (changing the relative velocity between the surfaces that come into contact with each other, changing of surface roughness, the center of friction (wet or dry), and the load).

 

Downloads

Published

2014-02-17

How to Cite

1.
سلامة أ, خفيف خ, سويقات ر. تصميم وتنفيذ آلة اختبار لدراسة تأثير خشونة السطوح على الاحتكاك والاهتراء في عقد الاحتكاك. Tuj-eng [Internet]. 2014Feb.17 [cited 2024Nov.24];36(1). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/774

Issue

Vol. 36 No. 1 (2014): العلوم الهندسية

Section

Articles

License

Copyright (c) 2014 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.