Modeling and Designing a Drive System of IM with Scalar Control (v/f const. By Controlling the Slip and Using Microcontroller PIC

Authors

  • Nawal Esmaeel Tishreen University

Keywords:

التشغيل

Abstract

This paper concentrates on designing a Scalar Control (V/F Control) to drive a Squirrel  Cage  Induction  Motor IM tri-phase, operating in four-quadrants, according to the V/F= constant by controlling the slip, using the Pulse Width Modulation (PWM)  of a IGBTs voltage source inverter, that uses Microcontroller for controlling magnitudes both frequency and voltage according to V/F const. In order to keep the flux constant, and to keep the max value of torque constant with changing loads.

We have defined the operating conditions for the electrical drive system and then  designed the PI Controller, Limeter and Voltage controller for generating trigger signals that control the switches of inverter using the PWM principal by using PIC Microcontroller, and using the Simplorer11 program (Full version).

We have identified advantages and disadvantages of this system, which give fast response during transient conditions (start up- brake), and better performance, so raising the efficiency of the entire driving system.

Downloads

Published

2023-02-27

How to Cite

1.
اسماعيل ن. Modeling and Designing a Drive System of IM with Scalar Control (v/f const. By Controlling the Slip and Using Microcontroller PIC. Tuj-eng [Internet]. 2023Feb.27 [cited 2024Dec.23];44(6):165-83. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/13387

Issue

Vol. 44 No. 6 (2022): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2023 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.