تعويض الزمن الميت في نظم التحكم باستخدام النموذج المرجعي التكيفي

Authors

  • محسن داؤود
  • بلال شيحـا
  • نعمى حسـن

Abstract

لقد تمّ في هذا البحث معالجة مشكلة الزمن الميت التي تعد من أخطر المشاكل في النظم الحقيقية، لما تسببه من اضطراب لحلقة التحكم في نظم التحكم بالعمليات.

تمت المعالجة بتعويض تأثير هذا الزمن بوساطة معوضات الزمن الميت(DTCs)    Dead Time Compensators،

إذ تم اقتراح طريقة لتعويض التأخير الزمني تقوم على تكييف الربح مع زمن ميت  Gain Adaptive- Dead time Compensation  ، ومن ثم مقارنتها بالطرق السابقة التي تعاملت مع هذه المشكلة، كطريقة جيلز وبارتلي Giles And Bartley وطريقة سميث Smith Dead time-Compensation  .

وقد أثبتت النماذج التمثيلية المقدمة فعالية هذه الطريقة وبينت نقاط القوة والضعف فيها وفقاً لتغير الشروط المحيطة، كما تضمن البحث تمثيلاً برمجياً simulation للطرق الثلاث مع عرض لمنحنيات استجابة الخرج وحساب قيمة الخطأ الزمني المطلق.

This research addresses the problem of dead time, which is considered one of  the most danger problems in real systems, because of the disturbance it causes to the control loop in process control systems. Solving this problem was achieved by compensating the dead time effect by means of dead time compensators (DTCs).

A  method for compensating dead time was suggested. It is based on compensating dead time by gain adaptive (GADC), then comparing it with previous methods that dealt with this problem, like Giles and Bartley method (G&B) and smith method (SDC).

Representative models proved the viability of this method and displayed its strength and weakness points according to the changes in actuation conditions.

The research consists programming presentation (simulation) for these methods and present output response curves, calculating the integrate time absolute error (ITAE).

 

Downloads

Published

2019-01-24

How to Cite

1.
داؤود م, شيحـا ب, حسـن ن. تعويض الزمن الميت في نظم التحكم باستخدام النموذج المرجعي التكيفي. Tuj-eng [Internet]. 2019Jan.24 [cited 2024Nov.23];30(1). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/7043

Issue

Vol. 30 No. 1 (2008): العلوم الهندسية

Section

Articles

License

Copyright (c) 2019 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.