Clinical Study to Evaluate the Accuracy of the Marginal and Internal Fit of Lithium Disilicate Crowns Using Conventional and Digital Techniques

Authors

  • Nasser Baherli
  • Muhammad Marwan Chammout

Abstract

The aim of this clinical study was to assess the accuracy of the marginal and internal fit of lithium disilicate crowns made from convenitional impressions and technologies or digital impressions with 3D printing. The study sample included 22 full ceramic crowns (IPS e.max Press lithium disilicate), divided equally into 11 crowns made from a conventional impression with condensation silicone (pvs) and 11 crowns made from a digital impression with an intraoral scanner (i500) for the Korean company (Medit).

The patient had good oral health and had the indication of using full ceramic crowns as a result of the presence of old and bad fixed prosthodontics. Abutments prepared according to the principles of preparing the teeth to receive metal-free ceramic prosthodontics, with a deep chamfer finish line on the gingival line.

In this study, the marginal and internal gaps were measured by means of a replica technique without cementing crowns. We used a magnifier of the Italian-made OPTICA brand located in the Higher Institute for Environmental Research at Tishreen University with a magnification of 10 x to measure 4 points in the marginal region to study the marginal fit, 4 points on the axial surface and 4 points on the occlusal surface to study the internal fit of each crown.

We concluded within the limits of this clinical study:

  • There was no significant statistical difference in the marginal fit between the conventional and digital study groups.
  • The internal gap in the group of digital lithium disilicate crowns was smaller than that of conventional crowns.
  • All the internal and marginal gaps in this study were within clinically acceptable limits.

Downloads

Published

2020-08-01

How to Cite

1.
بهرلي ن, شموط مم. Clinical Study to Evaluate the Accuracy of the Marginal and Internal Fit of Lithium Disilicate Crowns Using Conventional and Digital Techniques. Tuj-hlth [Internet]. 2020Aug.1 [cited 2024Dec.26];42(3). Available from: https://journal.tishreen.edu.sy/index.php/hlthscnc/article/view/9769

Issue

Vol. 42 No. 3 (2020): Tishreen University Journal for Research and Scientific Studies - Medical Sciences Series

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Health Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Health Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Health Sciences Series  Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)

1 2 > >>