Use a Multi-level Series Active Filter Controlled by Sinusoidal Pulse Width Modulation Technology to Power Quality Enhancement in an Electrical Distribution Network
Keywords:
Power Quality, series active filter (SAF), multi-level inverter, synchronous reference frame theory, total harmonic distortion Total Harmonic Distortion (THD%).Abstract
The significant expansion of electrical networks and the increased sensitivity of devices to electrical disturbances have imposed severe restrictions on the power quality feeding the loads. The methodology for improving power quality using electronic devices is an effective solution to power quality problems.
In this paper, we suggest using the multi-level Series Active Filter (SAF) to address power quality problems related to voltage in distribution networks. The active filter was modeled in the MATLAB / Simulink platform, and the synchronous reference frame theory was applied to extract the reference voltage signals. Finally, those signals were compared with the measured voltage in the Sinusoidal Pulse Width Modulation (SPWM) system to generate the semi- conductors switches pulses.
The studied system was validated by simulating different voltage disturbances, then comparing the results if a two-level and multi-level filter was used. The results showed an improvement in the power quality when using the multi-level series active filter, and this appeared by reducing the total harmonic distortion factor that improves the voltage curve.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 �ttps://creativecommons.org/licenses/by-nc-sa/4.0/

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series
Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series . The Readers have the right to send, print and subscribe to the initial version of the article, and the title of Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series Publisher
journal uses a CC BY-NC-SA license which mean
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
- The licensor cannot revoke these freedoms as long as you follow the license terms.
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.