Modeling and Simulation the Effect of Welding Current and Welding Time on Welding Joint Stresses

Authors

  • Ahmad Salamh Tishreen University
  • Tammam Salloum Aleppo University

Keywords:

Spot Weld, Finite Element Method, Modeling and Simulation,welding connection.

Abstract

In this study, modeling and simulation was performed using the Finite element method (FEM )terminated method on the CATIA V5 program for a welding connection at welding currents (80, 100, 110, 120) amps and different welding times (6, 7, 8) seconds and the results showed that at a welding current of 110 amps For a period of 6 seconds, the distribution of heat stress was better through the diameter and depth of the welding zone.

As the results obtained using the CATIA V5 program were compared with the results of reference studies in this field and using different programs.

Author Biographies

Ahmad Salamh, Tishreen University

Associate Professor – Design and Production Engineering Department - Faculty of Mechanical and Electrical Engineering

Tammam Salloum, Aleppo University

Associate Professor – Dep. of Industrial Engineering - Faculty of Mechanical Engineering

Published

2021-07-07

How to Cite

1.
سلامة ا, سلوم ت. Modeling and Simulation the Effect of Welding Current and Welding Time on Welding Joint Stresses. Tuj-eng [Internet]. 2021Jul.7 [cited 2024Apr.23];43(3). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/10618

Most read articles by the same author(s)