اختبار فعالية طريقة إجهاد البقعة الحمراء لتقييم إجهادات التعب للوصلات اللحامية المختلفة باستخدام تحليل العناصر المنتهية

Authors

  • نيرودا بركات
  • مهند نصرة

Abstract

تم إجراء نمذجة اختبارات الشد والانحناء لوصلات لحامية مختلفة الشكل, والتصميم وكذلك حساب إجهاد البقعة الحمراء في مناطق الانهيار الحرجة بطريقة تحليل العناصر المنتهية, فكان هناك توافق كلي جيد بين المواقع الحرجة المحددة تجريبياً في دراسات مرجعية موثقةوبين نتائج النمذجة. لقد تبين أن ما تمت الإشارة له في لوائح المعهد الدولي للحام فما يتعلق بطريقة إجهاد البقعة الحمراء، تعطي قيم تقريبية دقيقة نسبياً حول إمكانية احتفاظ الوصلات المحملة على التعب بمعظم خواصها الميكانيكية المرغوبة, حتى تلك الوصلات التي يمكن أن تنهار فقط عند منطقة اتصالها بالمعدن الأساس. Tensile and bending tests modeling have been undertaken for various welded joints which were different in shape and design. Also, the hot spot stress was calculated at critical failure areas using the finite elements analysis method. There was a good similarity between experimentally defined critical areas in certain certified literature and those in our modeling. It appeared that the information listed in the international institute for welding (IIW) in regards of hot spot stress method gives relatively accurate values for the welded joints possibility to endure fatigue loading and keep their desired mechanical properties even those joints that could fail only at the connecting area with the base metal.

Downloads

Published

2017-10-25

How to Cite

1.
بركات ن, نصرة م. اختبار فعالية طريقة إجهاد البقعة الحمراء لتقييم إجهادات التعب للوصلات اللحامية المختلفة باستخدام تحليل العناصر المنتهية. Tuj-eng [Internet]. 2017Oct.25 [cited 2025Jan.28];38(5). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/3270

Issue

Vol. 38 No. 5 (2016): العلوم الهندسية

Section

Articles

License

Copyright (c) 2017 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.