استخدام مرشحات الطاقة الفعالة لتحسين جودة الطاقة

Authors

  • علي أحمد محمود

Abstract

هذا العمل يقترح طريقة بسيطة للتحكم بالمرشح الفعال من خلال استخدام المنظم التقليدي PI (Proportional Integral ) للحصول على إشارة خرج بأقل خطأ استاتيكي ممكن.

إن طريقة التحكم المقترحة بتيار خرج المرشح الفعال تستخدم إشارة دخل (كإشارة مرجعية) عبارة عن إشارة في المحاور d-q من خلال تحويل إشارة التيار الفعلية المتناوبة ثلاثية الطور a, b, c وذلك لتعويض التوافقية الخامسة 5th والسابعة 7th. وبينت الدراسة بالنمذجة والتطبيق المخبري أن المرشح الفعال يعمل بفعالية ودقة جيدة لإلغاء التوافقية الخامسة والسابعة الناجمتين عن الأحمال اللاخطية.

This paper proposes a simple current control for Active Filters based P+Resonant compensator used in conjunction with traditional (Proportional Integral) PI. The proposed current control system is designed to operate with a single dq reference frame, synchronous with 50 Hz supply voltage, for the compensation of 5th and 7th harmonics. Another major advantage of this strategy is the ability to eliminate the external disturbance from the 5th and 7th harmonic components caused by power supply. The principle of the proposed control method and the design procedure is here presented. Simulation and experimental results confirm the effectiveness of the suggested approach.

Downloads

Published

2019-01-23

How to Cite

1.
محمود عأ. استخدام مرشحات الطاقة الفعالة لتحسين جودة الطاقة. Tuj-eng [Internet]. 2019Jan.23 [cited 2024Dec.26];28(2). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/6955

Issue

Vol. 28 No. 2 (2006): العلوم الهندسية

Section

Articles

License

Copyright (c) 2019 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.