تصغير خطوة الاستيفاء الداخلي الخطي باستخدام خوارزمية إقليدس

Authors

  • إبراهيم الشامي

Abstract

تبحث هذه الورقة  في تحليل فكرة زيادة عدد الخطوات اللازمة لتوليد قطعة مستقيمة تصل بين نقطتين ذات قيم إحداثيات صحيحة دون أن يؤثر ذلك في سرعة التوليد، وزيادة عدد الخطوات يتم عن طريق تقسيم كل خطوة إلى خطوتين أو أكثر.

يتم طرح خوارزمية جديدة تتصف بدقة توليد عالية ولا تتأثر سرعة التوليد فيها  بزيادة عدد الخطوات. إذ يمكن إدخال عدد مرات مضاعفة عدد الخطوات لنحصل على الدقة التي نرغب.

يستلزم تنفيذ الخوارزمية تطبيقها بمعالج مضمن يسمح بمضاعفة عدد عقد الشبكة لمستوي التوليد.

This paper researches the analysis of the idea of increasing the number of the needed steps for straight generation of piece that links between two points of integers coordinates values without affecting generation speed. Increasing the number of steps is achieved by splitting each step to two or more.

The new introduced algorithm is characterized by high accuracy of generation; its generation speed is not affected by increasing the number of steps, since it is possible to enter the number of times to double the number of steps to obtain the wanted accuracy.

Algorithm requires its application to the Embedded Processor which allows doubling the number of network nodes for generating surface

Downloads

Published

2019-01-30

How to Cite

1.
الشامي إ. تصغير خطوة الاستيفاء الداخلي الخطي باستخدام خوارزمية إقليدس. Tuj-eng [Internet]. 2019Jan.30 [cited 2024Dec.26];33(2). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/7283

Issue

Vol. 33 No. 2 (2011): العلوم الهندسية

Section

Articles

License

Copyright (c) 2019 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)