Studying the engineering and physical properties of seeds for some crops and their effect on the properties of feeders in seeders.

Authors

  • Rabie Habib
  • Muhammad Nour Al-dean Al-Tenbi

Keywords:

Engineering Physical properties of seeds, Physical properties of seeds, Dimensions of seeds, Feeding device, Cells of feeding, Fluted forced feed, Planter, Grain drill.

Abstract

A proper matching of agricultural machinery with properties of materials forms the essential requirements which lead to best performance of machine.

To achieve that goal, availability of data and precision analysis on engineering and physical properties of these materials is required. This forms important and necessary data base for the design, development and structure of agricultural machinery and equipments, control and analysis of machines and determination of efficiency of machines.

This research was carried out to study some engineering and physical properties of seeds of common Syrian crops to be used in the design and development of some agricultural machinery and equipments.  

Results provided the shapes and dimensions of cells of feeding devices for planting seeds of some crops namely, wheat, maize, lentil, pea, chick-pea, kidney bean, broad bean and cotton.

In addition a set of empirical equations were established to be used to predict, with reasonable accuracy, the physical properties of crops seeds based on measurement of any of three dimensions (length, width and thickness). 

Downloads

Published

2020-11-16

How to Cite

1.
حبيب ر, التنبي منا. Studying the engineering and physical properties of seeds for some crops and their effect on the properties of feeders in seeders. Tuj-eng [Internet]. 2020Nov.16 [cited 2024Nov.24];40(5). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/9976

Issue

Vol. 40 No. 5 (2018): Engineering Sciences Series

Section

Articles

License

Copyright (c) 2020 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)