The Environmental and Economic Impact of Applying Radiant Slabs Technology in Syria

Authors

  • Imad Aldin Kinjo Tishreen University
  • Amani Abu Ali Tishreen University

Keywords:

radiant slab, floor heating, sustainability, thermal comfort .

Abstract

 

In Syria, buildings often lack thermal design and Heating, Ventilating, and Air Conditioning systems, and they are being replaced by solutions that do not provide thermal comfort and damage the environment.

The pursuit of thermal comfort, the high price of fuel and the increased awareness of its negative impact on the environment are guide reasons for considering solutions that cause less environmental damage, and provide the required thermal comfort at the lowest cost.

In this research, the radiant slabs technology was studied as an alternative that will be compared with traditional case in Syria (Hourdi slabs and the radiators system) in terms of the costs during the building life cycle and the emission of harmful gases to the environment.

The study proved that the radiant slabs in comparison with traditional case were able to reduce the life cycle costs of studied buildings by an annual average of about 860 Sp/m2 at an exchange rate 400 Sp/$, while they increased the amount of harmful gases that emitted to the environment slightly by annual averages of about: (2.4, 0.0003, 0.03, 0.006) kg/m2 for each of the following gases: (CO2, CO, SO2, NOX), respectively.

Author Biographies

Imad Aldin Kinjo, Tishreen University

Assistant Professor, Department of Construction Engineering And Management, Faculty of civil Engineering,

Amani Abu Ali, Tishreen University

Postgraduate Student (Master) , Department of Construction Engineering And Management, Faculty of civil Engineering

Downloads

Published

2021-11-07

How to Cite

1.
كنجو عا, ابو علي ا. The Environmental and Economic Impact of Applying Radiant Slabs Technology in Syria. Tuj-eng [Internet]. 2021Nov.7 [cited 2024Nov.24];43(5). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/11023

Issue

Vol. 43 No. 5 (2021): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Master student researches

License

Copyright (c) 2021 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.