Improving the Behavior of Loss Of Mains Protection in Electrical Distribution Networks with Distributed Generation by Using of Performance Curves

Authors

  • Fouad Salha Damascus University

Keywords:

Distributed Generation, electric synchronous generator, Loss of Mains protection, Rate Of Change Of Frequency.

Abstract

Loss-Of-Mains protection (LOM) is a requirement for connecting the generation units to the distribution network. This protection, which is based on the instantaneous reading of the frequency of the distribution network, disconnects the distributed generator only when the mains supply is cut off. Frequency change due to other reasons other than the loss of the main supply, usually, causes a failure in the work of these protections and therefore the false disconnection of the distributed generators. This paper presents a method to avoid this false disconnection by, first, deducing and drawing the performance curves of the ROCOF (Rate of Change Of Frequency) used to protect against loss of  mains. Second, boundary conditions were proposed to place the performance curves between two boundary curves that confine an area representing the work area of ​​these relays. Modeling and simulation were done using MATLAB for an electrical system consisting of a synchronous distributed generator, connected to the electrical system via a power distribution line, in addition to a set of loads.

Author Biography

Fouad Salha, Damascus University

Assistant Professor, Faculty of Mechanical & Electrical Engineering, Electrical Power Engineering Department,

Downloads

Published

2022-03-04

How to Cite

1.
صالحة ف. Improving the Behavior of Loss Of Mains Protection in Electrical Distribution Networks with Distributed Generation by Using of Performance Curves. Tuj-eng [Internet]. 2022Mar.4 [cited 2024Dec.23];44(1):45-61. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/11824

Issue

Vol. 44 No. 1 (2022): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2022 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.