Study the Effect of Adding Materials (Calcine Powder Styropor Granules and Straw) on the Compressive Strength for Material Polyurethane

Authors

  • Rawad Shakohe Tishreen University

Keywords:

البولي اوريثان بولي يول بولي ايزوسيانات

Abstract

        The research aims to study the effect of adding different materials to polyurethane on the compressive strength before and after adding the materials.

Samples of this material were made with different percentages of polyisocyanate and polyols, (which are organic compounds derived from the oil that) they make up.

Where the following materials were added( Straw,calcinepowder,and styrepor granules)in order to study thecompressive strength of polyurethane,where the compressive strength of samples of this insulation material was measured at different ratios of polyisocyanate and polyol with and without additives for,another material. thermal insulation material of polyurethane with a compressive strength of 640 (KN/m2), consisting of 74%  polyisocyanates and24%  polyols by weight, with the addition of calcine powder at a rate of 2 % .

Downloads

Published

2023-03-15

How to Cite

1.
Shakohe R. Study the Effect of Adding Materials (Calcine Powder Styropor Granules and Straw) on the Compressive Strength for Material Polyurethane. Tuj-eng [Internet]. 2023Mar.15 [cited 2025Jan.22];45(1):143-54. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/13725

Issue

Vol. 45 No. 1 (2023): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2023 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.