Improving Fatigue Resistance of Spinning Machine Springs and Simulation of Fatigue

Authors

  • Ali Saeed Tishreen University
  • Sulaiman Ali Tishreen University
  • Ali Hatra Tishreen University

Keywords:

Springs, Heat Treatment, SUP3, Fatigue, Simulation

Abstract

The effect of heat treatment on the tensile strength and fatigue strength of carbon spring steel was studied. The main objective of this study was to improve fatigue resistance of springs by changing the microstructure using different types of heat treatments. Tensile and fatigue tests were used for evaluating the results of the experimental heat treatments. The tensile tests gave the maximum tensile strength of the material and the fatigue tests gave the number of cycles the material can withstand before failure occurs at certain stress level. Finally a 3D Model of a real life spring was done and fatigue simulation was conducted while taking into consideration the properties of the material that were acquired after the tensile and fatigue tests. The results showed improvements of fatigue resistance of springs using heat treatment.

Downloads

Published

2023-03-15

How to Cite

1.
سعيد ع, سليمان علي, علي هترة. Improving Fatigue Resistance of Spinning Machine Springs and Simulation of Fatigue. Tuj-eng [Internet]. 2023Mar.15 [cited 2024Nov.24];45(1):197-20. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/14191

Issue

Vol. 45 No. 1 (2023): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2023 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)