Improve the efficiency of the control systems for DC electric elevators using Artificial Intelligence

Authors

  • Hazar Moussi Tartous university
  • Mikhaiel Salim Makhoul Tartous University
  • Doha Khaled jdeed Tartous University

Abstract

The stability of the control system and its high efficiency in various operating conditions is the biggest concern for designers of control systems, this research provides an improved design of a control system used to drive and and control the operation of an electric elevator with a DC motor, a system using (Propotional Integral controller,PI) was developed, the system was also updated from two aspects, the first of which is  the introduction of the differential control system, in addition to the use of the Fuzzy control as a debugger supervisory system to the output of the PID system( Propotional Integral Derivative controller), motor speed has been compared with  the change of time during start and stop, and the displacement from the stopping point of the elevator, the simulation results using MATLAB/Simulink showed the superiotity of the proposed Fuzzy-Pid system by up to 85.7%,The system has also been tested for different loads, and the results showed an improvement in the shape of the signal when the mass increased with an error rate of 17.2%.

Downloads

Published

2023-07-18

How to Cite

1.
موسي ه, مخائيل سليم مخول, ضحى خالد جديد. Improve the efficiency of the control systems for DC electric elevators using Artificial Intelligence. Tuj-eng [Internet]. 2023Jul.18 [cited 2024Dec.23];45(3):257-69. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/14776

Issue

Vol. 45 No. 3 (2023): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Master student researches

License

Copyright (c) 1970 Https://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.