Increasing the impact strength and wear resistance of Hadfield steel used in excavator teeth and crusher hammers by adding chromium and molybdenum

Authors

  • Nassim daher Tishreen University
  • Ali Hatra Tishreen University
  • Ahmad Salamah Tishreen University

Abstract

Work has been done on adding chromium and molybdenum to Hadfield steel, from which crusher hammers and excavator teeth are made. The process of smelting the metals required to form Hadfield steel with chromium and molybdenum in different proportions was carried out according to two meltings, then casting the samples in sand molds and performing rapid cooling in water after casting, then testing the impact, wear and hardness of the samples.

The results showed an increase in hardness and thus an increase in wear resistance. The impact toughness also increased as a result of the addition of chromium and molybdenum. Thus, the resulting steel became more tolerant of heavy service conditions, which leads to economic cost savings in addition to the scientific aspect..

Downloads

Published

2024-01-31

How to Cite

1.
ضاهر ن, علي هترة, احمد سلامة. Increasing the impact strength and wear resistance of Hadfield steel used in excavator teeth and crusher hammers by adding chromium and molybdenum. Tuj-eng [Internet]. 2024Jan.31 [cited 2024Nov.24];45(6):173-85. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/14856

Issue

Vol. 45 No. 6 (2023): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 1970 Nttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)