Studying the Effect of Using Rapid Modeling (RP) in Manufacturing Brushes as an Alternative to the Traditional Manufacturing Process

Authors

  • Kholoud Alkubeily Tishreen University

Abstract

During this research, We designed lathe bed from two sheets depending on sheets system which used in rapid prototyping, so that we can detective some of aids: reducing the economic effects of the friction and wear in order to achieve the best mechanical properities, and reducing costs of the required materials to make the damaged parts and costs of the maintenance.

And taking advantage of Catia program, and finite element method, lathe bed meduim sized, type ZMMC400TN, weight is 700kg, and force is 15KN.

We have passed researching  in accordance with the following main points:

  • Conduct comparian between two cases of the lathe bed, which the first case is making from Cast iron, and the second case is making from two sheets( depending on Rapid prototyping) steel and cast iron.
  • Conduct comparian between three cases of the lathe bed in terms of deformation, stress distribution on the axis , von misses stress and bed weight which the first case is making from cast iron, and the second case is making from steel and the three case is making from Ipoxy granite.
  • Conduct iconomic comparian between two cases of the lathe bed depending on results of the plans and rapid prtotyping principle.

And we have reached the following results:

  1. Potential manufacturing the bed from two or more materials according to the number of suggested sheets, and replaced the cast iron with less expensive materials and best mechanic properties.
  2. Reducing the friction and wear effects on surface according to the bed material, and reducing the stresses applied on the surface thereby achieve longer life of the bed whithout damage.
  3. Achieve saving in maintenance costs of the damaged parts and saving in the time required for maintenance.

Downloads

Published

2024-01-31

How to Cite

1.
القبيلي خ. Studying the Effect of Using Rapid Modeling (RP) in Manufacturing Brushes as an Alternative to the Traditional Manufacturing Process . Tuj-eng [Internet]. 2024Jan.31 [cited 2024Dec.23];45(6):71-82. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/16112

Issue

Vol. 45 No. 6 (2023): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2024 https://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.