Study of the effect of some manufacturing and operating defects on the unbalance of rotating shafts using MATLAB

Authors

  • Anas Al Saloumi Al-Baath University
  • muafaq almunjid Al-Baath University

Abstract

Rotary machines are widely used in mechanical and electromechanical systems that include motor axes, industrial turbine turbines, etc., in the case of an unbalanced distribution of the rotating masses around the axis of rotation, which leads to vibrations, which is a serious engineering problem that negatively affects the performance of these machines, where vibration occurs In any rotating machine due to manufacturing or operational defects, etc., these harmful vibrations are accompanied by the emergence of large centrifugal forces that can lead to damage to the bearings and eventually to the destruction of the machines. Therefore, vibration reduction techniques in such machines are of prime importance to improve performance

. One of the techniques used to improve the work of the rotary shaft is the shaft balancing technique, which is based on reducing vibration to a minimum (as practically vibrations cannot reach zero values), thus increasing the life of the bearings, reducing audible noise and energy loss, and thus improving the work of the rotor.

The aim of modeling and simulation of rotor systems is to study and determine the deflection of the rotating body due to vibration and to calculate the position and additional masses needed to remove the vibration when rotating at high speeds. In this research, we designed a mathematical model used to study the static behavior of rotating axes and to determine deviations at high speeds using MATLAB/SIMULINK software..

Downloads

Published

2024-01-31

How to Cite

1.
السلومي أ, موفق المنجد. Study of the effect of some manufacturing and operating defects on the unbalance of rotating shafts using MATLAB . Tuj-eng [Internet]. 2024Jan.31 [cited 2024Dec.23];45(6):161-72. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/16373

Issue

Vol. 45 No. 6 (2023): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2024 https://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.