النمذجة الرقمية لاستقراء انهيار وصلة لحامية حلقية معرّضة لتأثير ضغط غاز بحالتي الثبات والتغير

Authors

  • رائد النجار
  • طارق حسين

Abstract

This research submits an analyzed study that describes the reasons of failure happened in welded joints which are subjected to effects of pressure forces of gas, that flows through carbon-steel pipe which has connection with that joints, and its induced vibration which may lead to weakening it at its special Heat Affected Zone that be considered one of the most undesirable vestiges resulting from welding procedure and previous failure had been happened through it.

We had adopted numerical modeling by using program (ANSYS.14) to analyze the stresses affecting the welded joint in two distinct issues, static and dynamic pressure, which led to a set of conclusions that could be important notes to basics of a new design, can be used as a preventive procedure to limit the effect of the causes of the collapse.

النمذجة الرقمية لاستقراء انهيار وصلة لحامية حلقية
معرّضة لتأثير ضغط غاز بحالتي الثبات والتغير

يتضمن هذا البحث دراسة تحليلية لتبيان أسباب الانهيار الحاصل في الوصلات اللحامية الخاضعة لتأثير قوى ضغط الغاز المار خلال أنبوب ترتبط به هذه الوصلات والتي ينتج عنها نوعاً من الاهتزازات  التي تؤدي بدورها إلى إجهادها في المنطقة المتأثرة حرارياً منها والتي تعتبر أحد مخلفات عملية اللحام الأكبر تأثيراً على حالة الفشل الذي تعرضت له الوصلة .

تم اعتماد طريقة النمذجة الرقمية باستخدام برنامج (ANSYS.ver14) لتحليل الإجهادات المؤثرة في الوصلة بحالتي الضغط الستاتيكي والديناميكي الأمر الذي قاد إلى مجموعة من الاستنتاجات التي أُمكن من خلاها الاستدلال لأساسيات تصميم جديد يمكن استخدامه كإجراء وقائي يحد من تأثير أسباب الانهيار التي أدت إلى فشل الوصلة اللحامية السابقة .

Downloads

Published

2019-05-15

How to Cite

1.
النجار ر, حسين ط. النمذجة الرقمية لاستقراء انهيار وصلة لحامية حلقية معرّضة لتأثير ضغط غاز بحالتي الثبات والتغير. Tuj-eng [Internet]. 2019May15 [cited 2024Nov.24];39(4). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/3931

Issue

Vol. 39 No. 4 (2017): العلوم الهندسية

Section

Articles

License

Copyright (c) 2019 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)