تحضير مستحلب بوليميري للاستخدام في المعالجة النهائية للنسيج

Authors

  • حسين بكر
  • علي علي
  • أحلام حبيب

Abstract

في هذا البحث تم تحضير مستحلب من البولي اتيلين غليكول بإذابته في الماء المقطر عند درجة الحرارة 150˚С وزمن 8 دقائق, بعد إتمام الإذابة تم إضافة المواد ( زيت عباد الشمس, والغليسيرين, والمادة المولفة, وحمض الليمون, وأكسيد الزنك ). دُرس تأثير تركيز الإضافات على التركيب الكيميائي للمستحلب المحضر, بدراسة تغير لزوجة المستحلب مع تركيز الزيت والغليسيرين والمادة المولفة وحمض الليمون وأكسيد الزنك. أظهرت النتائج بأن المستحلب المحضر له مظهر حليبي فاتح, نوعه O/W, لزوجته 4500cp, قابل للامتزاج بالماء والزيت, وقد أعطى نعومة وطراوة جيدة بعد تطبيقه على الجلد البشري والنسيج, ولم يسبب أي إثارة أو تهيج عند ملامسته للجلد  البشري. تم تطبيق المستحلب المحضر على نسيج نوعه ( قطن خام 100%, قطن ممزوج بالبوليستر بنسبة 65%
قطن \35% بوليستر, بوليستر100% ), بدهن النسيج بالمستحلب المحضر بوساطة فرشاة يدوية حتى تجانس السطح, ثم تم معالجة النسيج حرارياً عند درجة الحرارة 50˚С لمدة ساعة. ثم دﱡرست الخصائص الفيزوميكانيكية للنسج المعالجة وغير المعالجة كمقاومة الشد, مقاومة التمزق, مقاومة الاحتكاك, التبلل, زيادة الوزن. أظهرت النتائج, ازدياد مقاومة الشد ومقاومة الاحتكاك وانخفاض مقاومة التمزق للنسج المدروسة بعد المعالجة بالمستحلب. أيضاً بينت النتائج ازدياد البلل لنسج القطن الخام والقطن الممزوج ونسيج البوليستر بعد المعالجة. كما لوحظ ازدياد في الوزن للنسج المعالجة بالمستحلب.

In this search, An emulsion has prepared of Glycol polyethylene by dissolve it in distilled  water at temperature of 150˚С for 8 min. When we completely finish the process of melting, we add additives ( sunflower oil; glycerin; Steric acid; Comptibilzer; zinc oxide; distilled water). Additives concentration effect have been investigated on a chemical structure of a prepared emulsion by studying change of emulsion viscosity with oil, glycerin, Steric acid, Comptibilzer, zinc oxide concentration changing .

The prepared emulsion has bright milky appearance, O/W,  his viscosity 4500cp, its able to mix with water and oil, fine and good soft gave to fabric and human skin after the prepared emulsion applying to fabric and human skin, this emulsion don’t cause any agitation or excitement at its touching to human skin. The prepared emulsion has been applied to ( crude cotton; blended cotton with polyester%65\%35; polyester ) fabric, where we the fabric  paint by the prepared emulsion by manual brush up to similarity surface, after that the coated fabric have been handled by heat at temperature of 50˚С for 1 hour .

Physico-mechanical properties have been studied to coated fabric and noncoated fabric as; the tensile strength, the abrasion resistance, the tearing strength, the wettness, the weight increase .

The resulting show that: the tensile strength; the abrasion resistance increase and The tearing strength decrease to studying coated fabric after treatment by emulsion. As well  The wettness increase of coated crude cotton; blended cotton fabric and coated polyester fabric after treatment. As it notice increase of the fabric weight after treatment by emulsion.

Downloads

Published

2018-12-09

How to Cite

1.
بكر ح, علي ع, حبيب أ. تحضير مستحلب بوليميري للاستخدام في المعالجة النهائية للنسيج. TUJ-BA [Internet]. 2018Dec.9 [cited 2024May1];34(2). Available from: https://journal.tishreen.edu.sy/index.php/bassnc/article/view/5253