دراسة إمكانية تعديل بعض خواص مركبات البولي استر غير المشبع بإضافة مواد مطاطية

Authors

  • رامي منصور
  • نبيل مقدسي
  • زبيده طه

Abstract

يهدف البحث إلى دراسة إمكانية تعديل بعض خواص البولي استر غير المشبع بإضافة مواد مطاطية وذلك بهدف تحسين خصائص المرونة. استخدم لهذا الهدف نفايات إطارات السيارات بشكلين قطع وبودرة، كما استخدم أيضاً كنوع آخر المطاط السائل الستارين بوتادين. ثم تم رصد التعديل من خلال قياس قدرة المواد المركبة الناتجة على امتصاص طاقة الاهتزاز وتخفيض الضجيج الناتج عن دوران عمود كرنك لامركزي وذلك عند سرعات دوران مختلفة(300,500,700)rpm . أظهرت نتائج الاختبارات وجود تعديل في بنية المركبات عند سرعة دوران منخفضة (300 rpm) في حين أظهرت نتائج مختلفة عند سرعات الدوران العالية. This paper is targeting towards studying on the possibility to modify some properties of unsaturated Polyester compounds by adding rubber materials in order to improve its flexibility property. For this target, Waste of cars' tires was used in two forms powder and pieces, and the liquid rubber Styrene-butadiene was used as another type of rubber. After that the modification was detected by measuring the possibility of the resulted compound materials to absorb vibration power, and reduce the noise that is produced by eccentric crankshaft circulation at different rotating speeds, (300, 500, 700) rpm. Test results demonstrate that there will be Modification in the construction of the compounds at low rotating speeds (300 rpm). On the other hand, it demonstrates different results at high rotating speeds.

Downloads

Published

2017-10-26

How to Cite

1.
منصور ر, مقدسي ن, طه ز. دراسة إمكانية تعديل بعض خواص مركبات البولي استر غير المشبع بإضافة مواد مطاطية. Tuj-eng [Internet]. 2017Oct.26 [cited 2024Nov.23];38(5). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/3273

Issue

Vol. 38 No. 5 (2016): العلوم الهندسية

Section

Articles

License

Copyright (c) 2017 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)

1 2 3 > >>