The possibility of exploitation of sea wave power in Syria

Authors

  • George Isber
  • Haitham Issa
  • Zoalfakkar Ali

Keywords:

sea wave power ,wave height, wave period, wave speed, sea wave power converter.

Abstract

This paper presents the characterization of sea  wave behavior in some areas  of Lattakia shore, through monitoring for more than one site different from each other by terrain,  water depth and bottom type (sand, rocks).

It also presents results of measurements of wave height values and their period at breakwater area of Lattakia port, and also shows results of power calculations trans- mitted with waves and speed of those waves, and brings a comparison of energy values calculated using different experimental equations is being used globally,  and shows that wave's speed and period are independent from each other.

Also shows that it is possible to apply wave power techniques in Syria ,relying on principle of high strength and low height , best way to achieve this is through hydraulic circuits ,and installation of a central system and several subsystems connected to it ,this provides a continuous flow of power.

Downloads

Published

2020-11-16

How to Cite

1.
اسبر ج, عيسى ه, علي ذا. The possibility of exploitation of sea wave power in Syria. Tuj-eng [Internet]. 2020Nov.16 [cited 2024Nov.23];40(5). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/9993

Issue

Vol. 40 No. 5 (2018): Engineering Sciences Series

Section

Articles

License

Copyright (c) 2020 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)

1 2 > >>