Modeling and Simulation the Effect of Welding Current and Welding Time on Welding Joint Stresses

Authors

  • Ahmad Salamh Tishreen University
  • Tammam Salloum Aleppo University

Keywords:

Spot Weld, Finite Element Method, Modeling and Simulation,welding connection.

Abstract

In this study, modeling and simulation was performed using the Finite element method (FEM )terminated method on the CATIA V5 program for a welding connection at welding currents (80, 100, 110, 120) amps and different welding times (6, 7, 8) seconds and the results showed that at a welding current of 110 amps For a period of 6 seconds, the distribution of heat stress was better through the diameter and depth of the welding zone.

As the results obtained using the CATIA V5 program were compared with the results of reference studies in this field and using different programs.

Author Biographies

Ahmad Salamh, Tishreen University

Associate Professor – Design and Production Engineering Department - Faculty of Mechanical and Electrical Engineering

Tammam Salloum, Aleppo University

Associate Professor – Dep. of Industrial Engineering - Faculty of Mechanical Engineering

Downloads

Published

2021-07-07

How to Cite

1.
سلامة ا, سلوم ت. Modeling and Simulation the Effect of Welding Current and Welding Time on Welding Joint Stresses. Tuj-eng [Internet]. 2021Jul.7 [cited 2024Nov.24];43(3). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/10618

Issue

Vol. 43 No. 3 (2021): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Articles

License

Copyright (c) 2021 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)