Studying The Physical And Mechanical Properties Of Roller Compacted Concrete Used In The Construction Of Gravity Dams

Authors

  • Mounzer Hammad Tishreen University
  • Ali Kheirbek Tishreen University
  • Ali Fissal Blidi Tishreen University

Abstract

Roller Compacted Concrete (RCC) is usually used in paving roads and airports and building block structures as a result of its quality represented by high strength , speed of implementation and low construction cost.

In order to reduce the amount of building materials (portland cement) thus achieving economic savings, the tendency was to use Roller Compacted Concrete RCC to build gravity dams, several concrete mixtures have been designed with local materials and inexpensive additives (marble powder), which are used as a substitute for fly ash and natural pozzolan, which are commonly used in building RCC dams.

In this research, the physical and mechanical properties of the produced concrete were studied, and we reached a mixture using low quantity cement 150 kg/m3, which achieved a high density 2540 Kg/m3 and compressive strength 14.6 MPa, which is very good for  the requirements of  concrete used in dams, as well as achieving direct tensile strength 1.56 MPa and impermeability  to water penetration.

Downloads

Published

2023-06-13

How to Cite

1.
منذر حماد, علي خيربك, علي فيصل بليدي. Studying The Physical And Mechanical Properties Of Roller Compacted Concrete Used In The Construction Of Gravity Dams. Tuj-eng [Internet]. 2023Jun.13 [cited 2024Nov.24];45(2):189-204. Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/15204

Issue

Vol. 45 No. 2 (2023): Tishreen University Journal of Research and Scientific Studies - Engineering Sciences Series

Section

Master student researches

License

Copyright (c) 2023 https://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.