المعالجة الإشعاعية للمزائج EPDM – LLDPE))

Authors

  • رامي منصور
  • علي علي
  • مصعب غانم

Abstract

تمّ إجراء عمليّة تشابك المزائج (EPDM/LLDPE) ذات نسب المزج المختلفة من خلال المعالجة الإشعاعيّة لهذه المزائج بأشعّة غاما، وقد تبيّن أنّ زيادة تركيز LLDPE في المزائج يحسّن الخواصّ الميكانيكيّة لهذه المزائج، كما لوحِظ ازدياد كل من مقاومة الشدّ والقساوة في المزائج مع ازدياد قيمة الجرعة الإشعاعيّة إلى 200KGy نتيجة ازدياد كثافة التشابك العرضي للسلاسل الجزيئيّة التي يستدلّ عليها من الزيادة المستمرّة في محتوى الجل مع ازدياد قيمة الجرعة الإشعاعيّة بعد الغمر في مذيب التولوين، بينما لوحظ ازدياد قيمة الاستطالة عند الانقطاع Eb في المزائج المحتوية على نسب مختلفة من EPDM بشكل بسيط عند التشعيع بجرعاتٍ منخفضة  (£ 70 KGy)ومن ثمّ تأخذ بالتناقص مع ازدياد الجرعة الإشعاعيّة إلى 300KGy.

Radiation cross-linking of (EPDM-LLDPE) blends has been carried out by gamma radiation. It has been found that the addition of LLDPE improves the mechanical properties of EPDM; it has also been concluded that the tensile strength and hardness of these blends increases rapidly by increasing an absorbed dose up to 200KGy and starts to decrease or level off with further increase of radiation dose up to 300KGy. This behavior is believed to be due to the formation of radiation – induced cross-linking in the components is evidenced by the gel content value. The values of elongation at break (Eb) of the blends containing different concentrations of the EPDM increase slightly and reach a maximum value at the irradiation dose of (£ 70 KGy). Then, the value of Eb decreases with increasing the irradiation dose up to 300 KGy .

Downloads

Published

2019-01-27

How to Cite

1.
منصور ر, علي ع, غانم م. المعالجة الإشعاعية للمزائج EPDM – LLDPE)). Tuj-eng [Internet]. 2019Jan.27 [cited 2024Nov.24];30(2). Available from: https://journal.tishreen.edu.sy/index.php/engscnc/article/view/7058

Issue

Vol. 30 No. 2 (2008): العلوم الهندسية

Section

Articles

License

Copyright (c) 2019 ttps://creativecommons.org/licenses/by-nc-sa/4.0/

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series

 Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series   .  The Readers have the right to send, print and subscribe to the initial version of the article, and the title of  Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series     Publisher

journal uses a CC BY-NC-SA license which mean

You are free to:

  • Adapt — remix, transform, and build upon the material
  •  
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

 

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial — You may not use the material for commercial purposes.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Most read articles by the same author(s)

<< < 1 2 3