Design and Analysis of a Wide-Band Printed Fractional Antenna for Medical and Internet Equipment Applications
Keywords:
Printed Antenna, Broadband Antenna, Fractional Engineering, HFSS Simulator, Internet Equipment, Medical EquipmentAbstract
Printed antennas are considered to be one type of the most common antennas in the field of wireless communication, as they are widely used in internet equipment and wireless medical equipment, due to their simple structure, low cost and good gain.
Internet equipment and wireless medical equipment are characterized by their high sensitivity in transmitting data, and in the accuracy of manufacturing their printed circuits, therefore the antenna used in such equipment is considered an essential component, and must be characterized by the best parameters in terms of gain, directivity, radiation energy and quality.
This paper presents a design for a wide-band printed fractional antenna operating in several frequency fields, suitable for internet and wireless medical applications within
the range of (1-10) GHZ, by using fractional engineering, that provides a multi-dimensional structure, in order to generate different resonant frequencies according to the effective lengths in this structure.
The aforementioned antenna was designed and analyzed using HFSS (High Frequency Structure simulation), which is considered as a virtual lab, that allows to perform a large number of tests, which saves time and cost, until reaching the appropriate design for the required application. This simulator allows the analysis of all the antenna parameters such as frequency, gain, bandwidth, radiation pattern and reaching frequency response.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 ttps://creativecommons.org/licenses/by-nc-sa/4.0/
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series
Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series . The Readers have the right to send, print and subscribe to the initial version of the article, and the title of Tishreen University Journal for Research and Scientific Studies - Engineering Sciences Series Publisher
journal uses a CC BY-NC-SA license which mean
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
- The licensor cannot revoke these freedoms as long as you follow the license terms.
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
